Your ad featured and highlighted at the top of your category for 90 days just $5.
"Make this ad premium" at checkout.

Check with seller Led Street Light Housing Manufacturer Introduces The Skills Of Installing Solar Street Lights Alakanuk

Published date: January 6, 2021
  • Location: Alakanuk, Alaska, United States

Led Street Light Housing Manufacturer introduces the steps to install solar street lights?

1. Light pole foundation: The designer designs the foundation drawings according to the height of the light pole, the flange, the embedded parts, and the size of the battery. During the construction, the ground cage (embedded parts) is placed in the pit, and the projecting part is approximately above the ground. 6cm, it should be noted that the threaded part should not be damaged. Place a pipe with a diameter greater than 30mm obliquely, and the length should be about 10cm from both ends of the embedded part. The pipe head is located in the center of the embedded part (note that the pipe cannot appear Dead bend), seal both ends of the pipe with tape, and then pour concrete into the foundation pit.

2. Battery foundation: Dig the pit according to the earthen size. The four "walls" are ground with concrete, and the bottom of the pit is sand for easy drainage. According to the size of the battery bank, make a cement cover.

3. Threading: Pass the 1.5mm sheathed power cord from the lamp arm of the lamp pole to the bottom of the lamp pole door, and connect it to the output terminal of the controller. Leave about 10cm of the power cord at the outlet of the clamp arm;

4. Wear solar panel cables: Pass the 1.5mm sheathed power cord from the top of the light pole to the bottom of the light pole door, and leave the solar panel power cord according to whether the solar panel has a lead;

5. Fix the head of the LED street light, connect the positive and negative poles tightly when wiring, pay attention to waterproof and prevent leakage;

6. Connect the solar panel bracket to the socket and adjust the direction of the solar panel bracket. The standard time panel faces the south direction. If it cannot face the south under special circumstances, use the longest light time and maximum light intensity as the principle, and use bolts fixed;

7. Put the solar panel on the bracket, and then fix the solar panel on the bracket with screws;
8. Put the battery into the battery slot, pass the power cord out of the tube fixed in advance in the light pole foundation, connect to the controller, and cover the cement cover of the battery slot;
9. Controller wiring: according to the order of battery, solar panel, load, respectively connect to the corresponding position of the controller (note: first negative "-" and then positive "+", and prevent short circuit); adjust according to system design The controller controls the off time and then puts the controller into the light pole.
10. Erect the lamp pole: check all the power cords before erecting the pole to ensure that there is no leakage or connection phenomenon. Use a crane to pull up the lamp pole so that the flange hole of the lamp pole is aligned with the embedded part (note the direction of the lamp), Fix it with screws. During the process of firming the anchor screws, adjust the direction of the light pole and level it.


11. System inspection: check whether the lamp pole and the embedded part bolts are fixed, whether the lamp is aligned and neat with the road surface, whether the lamp pole of the whole street lamp is neat; check whether the controller connection is loose; cover and fix the door panel.
Through the above introduction, High Quality Street Light Housing Manufacturers hope that you can simply refer to the content of this article in future use.

Keywords: Led Street Light Housing
Share by email Share on Facebook Share on Twitter Share on Google+ Share on LinkedIn Pin on Pinterest


Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings

  • Health Care Raw Material
    Health Care Raw Material
    Wholesalers - Americus (Kansas) - April 16, 2021 20.00 Dollar US$

    Spine Date Seed is a traditional Chinese herb. It contains jujuboside A, jujuboside B, betulinic acid, betulin and etc. Jujube seed powder was used to soothe the nerves, stop sweating, nourish the heart, benefit the liver, treat insomnia, t...

    Wholesalers - Almyra (Arkansas) - April 7, 2021 Free

                Cortexene is a dumbfounding and clear cerebrum boosting supplement that is portrayed to improve your mental work including getting more grounded, inspiration, focus and in like course memory inside a futile a...

    Wholesalers - Antonito (Colorado) - April 5, 2021 Free

      Selzia Keto is an effective ketogenic diet based supplement that reexamines your general body taking out fat through the ketosis cycle.It builds the digestion rate which implies a characteristic and solid body without putting forth much attemp...